View HMC618ALP3E_8974818.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

7 - 1 HMC618ALP3E gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz v00.1014 general description features functional diagram noise figur e: 0.75 db gain: 19 db oip3: 36 dbm single supply: +3v to +5v 50 ohm matched input/output 16 lead 3x3mm smt p ackage: 9 mm 2 typical applications electrical specifcations t a = +25 c, rbias = 470 ohm for vdd1 = vdd2 = 5v parameter vdd = 5 vdc units min. typ. max. min. typ. max. min. typ. max. frequency range 1200 - 1700 1700 - 2000 2000 - 2200 mhz gain 19 23 16 19 13.5 17 db gain variation over temperature 0.012 0.008 0.008 db/c noise figure 0.65 0.85 0.75 1.1 0.85 1.15 db input return loss 22.5 18 19.5 db output return loss 13 12.5 10 db output power for 1 db compression (p1db) 19 16.5 20 18 20 dbm saturated output power (psat) 20.5 20.5 20.5 dbm output third order intercept (ip3) 29.4 33.5 29.5 35 30.4 35.5 dbm supply current (idd) 89 118 89 118 89 118 ma * rbias resistor sets current, see application circuit herein the HMC618ALP3E is a gaas phemt mmic low noise amplifer that is ideal for cellular/3g and lte/wimax/4g basestation front-end receivers operating between 1.2 - 2.2 ghz. the amplifer has been optimized to provide 0.75 db noise fgure, 19 db gain and +36 dbm output ip3 from a single supply of +5v. input and output return losses are excellent and the lna requires minimal external matching and bias decoupling components. the HMC618ALP3E shares the same package and pinout with the hmc617lp3e 0.55 - 1.2 ghz lna. the HMC618ALP3E can be biased with +3v to +5v and features an externally adjustable supply current which allows the designer to tailor the linearity performance of the lna for each application. the HMC618ALP3E offers improved noise fgure versus the previously released hmc375lp3(e) and the hmc382lp3(e). the HMC618ALP3E is ideal for: ? cellular/3g and lte/wimax/4g ? bts & infrastructure ? repeaters and femto cells ? public safety radios for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 2 electrical specifcations t a = +25 c, rbias = 10k ohm for vdd1 = vdd2 = 3v parameter vdd = 3 vdc units min. typ. max. min. typ. max. min. typ. max. frequency range 1200 - 1700 1700 - 2000 2000 - 2200 mhz gain 18 22 15 18 12.5 15.8 db gain variation over temperature 0.009 0.009 0.009 db/c noise figure 0.8 1.1 0.9 1.2 0.9 1.2 db input return loss 26 17 19 db output return loss 14 13 11 db output power for 1 db compression (p1db) 10 15 12 15 13 15 dbm saturated output power (psat) 16 16 16 dbm output third order intercept (ip3) 28 28 28 dbm supply current (idd) 47 65 47 65 47 65 ma * rbias resistor sets current, see application circuit herein broadband gain & return loss [1] [2] gain vs. temperature [1] input return loss vs. temperature [1] gain vs. temperature [2] [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz 1700 to 2200 mhz tune -24 -14 -4 6 16 26 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 vdd=5v vdd=3v response (db) frequency (ghz) s21 s22 s11 12 14 16 18 20 22 24 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c - 40 c gain (db) frequency (ghz) 10 12 14 16 18 20 22 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c - 40 c gain (db) frequency (ghz) -25 -20 -15 -10 -5 0 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c - 40 c return loss (db) frequency (ghz) for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 3 output return loss vs. temperature [1] reverse isolation vs. temperature [1] [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm [3] measurement reference plane shown on evaluation pcb drawing. psat vs. temperature [1] [2] noise figure vs temperature [1] [2] [3] output p1db vs. temperature [1] [2] output ip3 vs. temperature [1] [2] HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz 1700 to 2200 mhz tune -25 -20 -15 -10 -5 0 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c - 40 c return loss (db) frequency (ghz) -40 -35 -30 -25 -20 -15 -10 -5 0 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c - 40 c isolation (db) frequency (ghz) 10 12 14 16 18 20 22 24 1.6 1.7 1.8 1.9 2 2.1 +25 c +85 c - 40 c p1db (dbm) frequency (ghz) vdd=3v vdd=5v 10 12 14 16 18 20 22 24 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c -40 c psat (dbm) frequency (ghz) vdd=5v vdd=3v 24 26 28 30 32 34 36 38 40 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 +25 c +85 c - 40 c ip3 (dbm) frequency (ghz) vdd=5v vdd=3v 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 vdd=5v vdd=3v noise figure (db) frequency (ghz) +85c +25 c -40c for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 4 [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm output ip3 and idd vs. supply voltage @ 1700 mhz [1] output ip3 and idd vs. supply voltage @ 1700 mhz [2] output ip3 and idd vs. supply voltage @ 2100 mhz [1] output ip3 and idd vs. supply voltage @ 2100 mhz [2] power compression @ 1700 mhz [1] power compression @ 1700 mhz [2] 1700 to 2200 mhz tune 25 27 29 31 33 35 37 39 0 20 40 60 80 100 120 140 4.5 5 5.5 ip3 idd ip3 (dbm) idd (ma) voltage supply (v) 24 26 28 30 32 34 36 38 0 20 40 60 80 100 120 140 4.5 5 5.5 ip3 idd ip3 (dbm) idd (ma) voltage supply (v) 25 27 29 31 33 35 37 39 0 20 40 60 80 100 120 140 4.5 5 5.5 ip3 idd ip3 (dbm) idd (ma) voltage supply (v) 24 26 28 30 32 34 36 38 0 20 40 60 80 100 120 140 4.5 5 5.5 ip3 idd ip3 (dbm) idd (ma) voltage supply (v) 0 5 10 15 20 25 85 90 95 100 105 110 -10 -8 -6 -4 -2 0 2 4 idd pout gain pae pout(dbm), gain(db), pae(%) idd (ma) input power (dbm) 0 5 10 15 20 25 42 49 56 63 70 77 -14 -12 -10 -8 -6 -4 -2 0 2 4 idd pout gain pae pout(dbm), gain(db), pae(%) idd (ma) input power (dbm) HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 5 [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm power compression @ 2100 mhz [1] power compression @ 2100 mhz [2] gain, power & noise figure vs. supply voltage @ 1700 mhz [1] gain, power & noise figure vs. supply voltage @ 1700 mhz [2] gain, power & noise figure vs. supply voltage @ 2100 mhz [1] gain, power & noise figure vs. supply voltage @ 2100 mhz [2] 1700 to 2200 mhz tune 0 5 10 15 20 25 85 90 95 100 105 110 -13 -10 -7 -4 -1 2 5 idd pout gain pae pout(dbm), gain(db), pae(%) idd (ma) input power (dbm) 0 5 10 15 20 25 44 51 58 65 72 79 -13 -11 -9 -7 -5 -3 -1 1 3 5 idd pout gain pae pout(dbm), gain(db), pae(%) idd (ma) input power (dbm) 14 16 18 20 22 24 26 0 0.2 0.4 0.6 0.8 1 1.2 4.5 5 5.5 gain p1db noise figure gain (db) & p1db (dbm) noise figure (db) voltage supply (v) 12 14 16 18 20 22 24 0 0.2 0.4 0.6 0.8 1 1.2 2.7 3 3.3 gain p1db noise figure gain (db) & p1db (dbm) noise figure (db) voltage supply (v) 14 16 18 20 22 24 26 0 0.2 0.4 0.6 0.8 1 1.2 4.5 5 5.5 gain p1db noise figure gain (db) & p1db (dbm) noise figure (db) voltage supply (v) 12 14 16 18 20 22 24 0 0.2 0.4 0.6 0.8 1 1.2 2.7 3 3.3 gain p1db noise figure gain (db) & p1db (dbm) noise figure (db) voltage supply (v) HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 6 output ip3 vs. rbias @ 1700 mhz gain, noise figure vs. rbias @ 1700 mhz [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm output ip3 vs. rbias @ 2100 mhz gain, noise figure vs. rbias @ 2100 mhz 1700 to 2200 mhz tune 15 20 25 30 35 40 45 100 1000 10000 vdd=5v vdd=3v rbias(ohms) ip3 (dbm) 15 20 25 30 35 40 45 100 1000 10000 vdd=5v vdd=3v rbias(ohms) ip3 (dbm) 16 17 18 19 20 21 22 0 0.2 0.4 0.6 0.8 1 1.2 100 1000 10000 vdd=3v vdd=5v gain (db) noise figure (db) rbias(ohms) 16 17 18 19 20 21 0 0.2 0.4 0.6 0.8 1 100 1000 10000 vdd=3v vdd=5v gain (db) noise figure (db) rbias(ohms) HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 7 output return loss vs. temperature [1] input return loss vs. temperature [1] output return loss vs. temperature [2] [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm input return loss vs. temperature [2] gain vs. temperature [1] 1200 to 1700 mhz tune gain vs. temperature [2] 16 18 20 22 24 26 28 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c gain (db) frequency (ghz) 16 18 20 22 24 26 28 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c gain (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c -40 c frequency (ghz) return loss (db) -30 -25 -20 -15 -10 -5 0 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c -40 c frequency (ghz) return loss (db) -20 -16 -12 -8 -4 0 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c -40 c frequency (ghz) return loss (db) -20 -16 -12 -8 -4 0 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c -40 c frequency (ghz) return loss (db) HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 8 reverse isolation vs. temperature [1] output p1db vs. temperature [2] noise figure vs. temperature [1] reverse isolation vs. temperature [2] noise figure vs. temperature [2] output p1db vs. temperature [1] [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm 1200 to 1700 mhz tune -50 -40 -30 -20 -10 0 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c isolation (db) frequency (ghz) -50 -40 -30 -20 -10 0 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c isolation (db) frequency (ghz) 8 10 12 14 16 18 20 22 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c p1db (dbm) frequency (ghz) 8 10 12 14 16 18 20 22 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c p1db (dbm) frequency (ghz) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c noise figure (db) frequency (ghz) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c noise figure (db) frequency (ghz) HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 9 output ip3 vs. temperature [1] output ip3 vs. temperature [2] [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k ohm [3] with vdd= 3v and rbias < 1k ohm may result in the part becoming conditionally stable which is not recommended. vdd1 = vdd2 (v) rbias idd1 + idd2 (ma) min (ohms) max (ohms) r1 (ohms) 3v 1k [3] open circuit 1k 28 1.5k 34 10k 47 5v 0 open circuit 120 71 270 84 470 89 absolute bias resistor range & recommended bias resistor values for idd psat vs. temperature [1] psat vs. temperature [2] 1200 to 1700 mhz tune 9 11 13 15 17 19 21 23 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c psat (dbm) frequency (ghz) 9 11 13 15 17 19 21 23 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c psat (dbm) frequency (ghz) 22 24 26 28 30 32 34 36 38 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c ip3 (dbm) frequency (ghz) 22 24 26 28 30 32 34 36 38 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 +25 c +85 c - 40 c ip3 (dbm) frequency (ghz) HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 10 absolute maximum ratings drain bias voltage (vdd1, vdd2) +6v rf input power (rfin) (vdd = +5 vdc) +10 dbm channel temperature 150 c continuous pdiss (t= 85 c) (derate 9.68 mw/c above 85 c) 0.63 w thermal resistance (channel to ground paddle) 103.4 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a, passed 250v vdd (vdc) idd (ma) 2.7 35 3.0 47 3.3 58 4.5 72 5.0 89 5.5 106 note: amplifer will operate over full voltage ranges shown above. typical supply current vs. vdd r bias = 10 kohm for 3v r bias = 470 ohm for 5v electrostatic sensitive device observe handling precautions outline drawing package information part number package body material lead finish msl rating package marking [2] hmc618lp3e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [1] 618 xxxx [1] max peak refow temperature of 260 c [2] 4-digit lot number xxxx notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 11 [1] vdd = 5v, rbias = 470 ohm [2] vdd = 3v, rbias = 10k pin number function description interface schematic 1, 3 - 5, 7, 9, 12, 14, 16 n/c no connection required. these pins may be connected to rf/dc ground without affecting performance. 2 rfin this pin is dc coupled and matched to 50 ohms. 6, 10 gnd this pin and ground paddle must be connected to rc/dc ground. 8 res this pin is used to set the dc current of the amplifer by selection of the external bias resistor. see application circuit. 11 rfout this pin is matched to 50 ohms. 13, 15 vdd2, vdd1 power supply voltage for the amplifer. external bypass capacitors of 1000 pf, and 0.47 f are required. pin description application circuit, 1700 to 2200 mhz tune HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 12 evaluation pcb, 1700 to 2200 mhz tune item description j1, j2 pcb mount sma rf connector j3 - j5 dc pin c2, c4 1000 pf capacitor, 0603 pkg.. c3, c5 0.47 f capacitor, tantalum l1 15 nh, inductor, 0603 pkg. l3 6.8 nh, inductor, 0603 pkg. c6 220 pf capacitor, 0402 pkg. c1 10 nf capacitor, 0402 pkg. r1 470 ohm resistor, 0402 pkg. u1 hmc618lp3(e) amplifer pcb [2] 120586 evaluation pcb [1] reference this number when ordering complete evaluation pcb item content part number evaluation pcb HMC618ALP3E evaluation pcb ev2hmc618alp3 list of materials for evaluation pcb evaluation pcb ordering information the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro - priate heat sink. the evaluation circuit board shown is available from hittite upon request. HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 13 application circuit, 1200 to 1700 mhz tune HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d
7 - 14 evaluation pcb, 1200 to 1700 mhz tune item description j1, j2 pcb mount sma rf connector j3 - j5 dc pin c1 10 nf capacitor, 0402 pkg. c2, c4 1000 pf capacitor, 0603 pkg.. c3, c5 0.47 f capacitor, 0603 pkg. c6 100 pf capacitor, 0402 pkg. c7 3 pf capacitor, 0402 pkg. l1 27 nh, inductor, 0603 pkg. l2 5.6 nh, inductor, 0603 pkg. l3 18 nh, inductor, 0603 pkg. r1 470 ohm resistor, 0402 pkg. u1 hmc618lp3(e) amplifer pcb [1] 600-00077-00 evaluation pcb [1] circuit board material: rogers 4350. item content part number evaluation pcb HMC618ALP3E evaluation pcb ev1hmc618alp3 list of materials for evaluation pcb evaluation pcb ordering information the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro - priate heat sink. the evaluation circuit board shown is available from hittite upon request. HMC618ALP3E v00.1014 gaas smt phemt low noise amplifier, 1.2 - 2.2 ghz for price, delivery and to place orders: hittite microwave corporation, 2 elizabeth drive, chelmsford, ma 01824 978-250-3343 tel ? 978-250-3373 fax ? order on-line at www.hittite.com application support: apps@hittite.com amplifiers - low noise - smt 7 information furn is hed by an al og devices is believed to be a cc urate and re lia bl e. however, no responsibility is assumed by an al og devices for its u se, no r for any infring emen ts of pat en ts or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. for price, delivery, and to place o rd ers: an al og devices, inc., one techn ol ogy way, p.o. box 9106, norwood, ma 02062-9106 phone: 781-329-4700 o rd er online at ww w.an alog .com app li cation sup po rt: p ho ne: 1-800-analog-d

▲Up To Search▲

Price & Availability of HMC618ALP3E

	To Download HMC618ALP3E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .